Don’t Expect, Inspect!

Brilliant Inspections, Best Reports, Fast!

Get Comprehensive Property Handover Inspection

You have been closely involved in the building of your new house for months. The completion date is just about in sight and you are already making plans on where the furniture will go. But, just before you sign off to take ownership, did you inspect every aspect of the building for compliance and workmanship? Have you had a Handover or Completion Inspection in Canberra?

A handover inspection is an evaluation  of your newly built house BEFORE you take ownership. This is where Resicert will go through everything in the property , from foundations to the ridge beam and make certain  everything is as it should be.

Inspection in Canberra

A builder must never prevent you (or a person certified  in writing to represent you) or your lending institution from examining  the building work as authorised by the contract or by regulations under the Act. A contract cannot limit  inspections except by restricting  them to normal working hours or forbidding inspections that would unreasonably impede or interfere with the building work.

REF: Building Commission: Notice to the Homeowner

Why do you need a handover inspection?

This is your last chance to detect  any concerns with the property before you take ownership and the contractor is done . You want everything to be right in order to prevent any disputes with the builder later on who is responsible for the problem and whether it is covered by your warranty.

What will our Home inspector do?

The property inspector will tune in to any specific concerns you may have about anything  that may be a problem, but you don’t feel the contractor has given a complete answer for. The inspector will complete a top to bottom assessment , inside and out including:

  • Basement walls and foundation
  • Roof and flashing
  • Exterior walls and siding
  • Each  room including any fixtures, fittings, door and window hardware
  • Drainage (if there was any required)
  • Check to make sure all work is complete
  • Inspect the quality of the work
  • Make sure  you are getting exactly what you paid for

You want to be certain you are getting exactly what you paid for.

All of our comprehensive reports are clear and easy to read and are available within 48 hours. You will also receive a thorough  verbal assessment  before the inspector leaves.

We have 4 different levels of inspections available. All reports cover structural certainty, roof cavity, subfloor, interior of every room, outside house perimeter, fences, outbuildings and trees.

The higher the inspection level, the more detail about the home you will receive in the reporting process.

Click to the right to receive a quote for the different levels of inspection and associated detail.

The price depends on some factors. To provide a quote we need to know something more about your house. Use the form on this page, and tell us a little bit more about the property.

Our Australian Capital Territory Team

what our clients say

Richard - ACT
Marciel - ACT
John Doe
Designer
John Doe
Designer
John Doe
Designer

WHY RESICERT

ISO 9001

ISO 9000 is a series of standards, developed and published by the International Organisation for Standardisation (ISO), that define, establish, and maintain an effective quality assurance system for manufacturing and service industries. The standards are available through national standards bodies.

ISO 9000 deals with the fundamentals of quality management systems, including the eight management principles upon which the family of standards is based.

ISO 9001 deals with the requirements that organisations wishing to meet the standard must fulfil.

© 2026 RESICERT. Trading as RESICERT INSPECTIONS PTY LTD. ALL RIGHTS RESERVED. ABN 25 160 491 663 – Terms and Conditions
© 2026 RESICERT. Trading in QUEENSLAND AS RESICERT PTY LTD ALL RIGHTS RESERVED. ABN 52 603 597 057.
Property & Building Inspections | Timber Pest | Pool Inspections | Handover Defects | Vendor Inspections | Owner Builder Warranty