Don’t Expect, Inspect!

Brilliant Inspections, Best Reports, Fast!

Get Comprehensive Handover Inspection

You have been involved in the structuring of your new home for months. The completion is just about in sight and you are already thinking where the furniture will go, but before you sign off to take possession, did you make sure that you double checked every part of the build for workmanship? Have you had a Handover or Completion Inspection in Perth?

A handover inspection is an examination of your brand new house BEFORE you take ownership. This is where Resicert will go through everything in the property, from foundations to the ridge beam and make sure everything is as it should be.

Inspections in Perth

A builder should not prevent you (or a person authorised in writing to represent you) or your lending institution from inspecting the building work as authorised by the contractor by regulations under the Act. A contractor cannot prevent inspections except by limiting them to normal working hours or not allowing inspections that would unreasonably limit or interfere with the building work.

REF: Building Commission: Notice to the Homeowner

Why do you require a handover inspection?

This is your last chance to detect any problems with the property before you purchase it and the contractor leaves. You want everything to be right in order to prevent disputes with the builder later on who is responsible for the issues and whether it is covered by your warranty.

What will our Resicert inspector do?

The inspector will pay attention to any specific concerns you may have about something that may be a problem, but you don’t feel the contractor has given a complete answer for. The inspector will conduct a top to bottom inspection, inside and out including:

  • Exterior siding and walls
  • Roof and flashing
  • Foundation and Basement walls
  • Every room including any fixtures, door and window hardware and fittings
  • Drainage (if there was any required)
  • Inspect to make sure all work is complete
  • Check the quality of the work
  • Ensure you are getting exactly your money’s worth

You want to be certain that  you are getting exactly what was expected.

All of our reports are clear and easy to read and are available within 48 hours. You will also receive a comprehensive verbal report before the inspector leaves.

We have 4 different levels of inspections available. All reports cover structural certainty, roof cavity, subfloor, interior of every room, outside house perimeter, fences, outbuildings and trees.

The higher the inspection level, the more detail about the home you will receive in the reporting process.

Click to the right to receive a quote for the different levels of inspection and associated detail.

The price depends on some factors. To provide a quote we need to know something more about your house. Use the form on this page, and tell us a little bit more about the property.

Our Western Australia Team

what our clients say

Richard - ACT
Marciel - ACT
John Doe
Designer
John Doe
Designer
John Doe
Designer

WHY RESICERT

ISO 9001

ISO 9000 is a series of standards, developed and published by the International Organisation for Standardisation (ISO), that define, establish, and maintain an effective quality assurance system for manufacturing and service industries. The standards are available through national standards bodies.

ISO 9000 deals with the fundamentals of quality management systems, including the eight management principles upon which the family of standards is based.

ISO 9001 deals with the requirements that organisations wishing to meet the standard must fulfil.

© 2026 RESICERT. Trading as RESICERT INSPECTIONS PTY LTD. ALL RIGHTS RESERVED. ABN 25 160 491 663 – Terms and Conditions
© 2026 RESICERT. Trading in QUEENSLAND AS RESICERT PTY LTD ALL RIGHTS RESERVED. ABN 52 603 597 057.
Property & Building Inspections | Timber Pest | Pool Inspections | Handover Defects | Vendor Inspections | Owner Builder Warranty